Good Service Turbine Flow Meter Thread Connection in Thailand

; ABOUT US; PRODUCTS. ... SERVICE INTECH 2000 has a service center with a service team to support our clients anytime when there is a problem. ... Turbine Flow Meter; Ultrasonic Flow Meter; Variable Area Flow Meter (Rotameters) Vortex Flow Meter; Paddle wheel flowmeter; Contact ...

Pickup thread connection: 9/16 x 26 TPI (or) UNF Maximum Flow Range: 150% of specified Max ... Type: PAF - Industrial Turbine Flow Meter Connection: Flanged connections: DIN/ANSI Pressure Rating: 250 ... work horse; with over 30 years of proven service. It is highly durable and extremely reliable. Depending on the input sensitivity of ...

Sep 29, 2003 · Turbine meters can be as accurate as 0.25% as long as they are purchased as such and the flowputer canpensate for the meter curve. A way to get better agreement between meters is to designate one meter the "master" meter with adjustments to the other meters k-factor (usually using meter factor) to get the 2 meters to agree with the ...

Jan 31, 2018 · Parts of turbine flow meter. rmanent conduit connection is standard. TOR is pitched and pre-calibrated to determine accuracy. 3.END CONNECTIONS available, flanged or threaded, stanease performance at low rates. 5.FLOW VANE HUB supports rotor assembly. .TOR SHAFT, BEARINGS, AND THRUST BALL are ...

RIF200-N turbine flow meters serve to accurate measurement of continuous and discontinuous flow rate values. This turbine flow meter is most suited for liquids with low viscosity, such as for example water, solvents, cleaning agents and light oils. The large range of different pipe connections and structural sizes allows using these flow meters ...

NUFLO flow meters can be overridden by 10 percent for short phases without harm. Both RF and Ring-Type joint designs (RTJ) are accessible to turbine flow meters with flanged bottom links. Flanged NUFLO meters are made from carbon or slip-on steel or single-block stainless steel flanges. To ensure that the flange neveres alive with the fluid ...

11 sizes available, 1/4” thru 3”, covering flow rates for .35 to 650 GPM. Manufactured to bepliant with the ASME BPE Bioprocessing Equipment Standard. -40 to +450°F standard operating temperature range. Linearity of ± .5%. Repeatability of ± .1%. All meter surfaces meet san finish.

35 bar with hose connection 500 bar with thread connection. Output signals: 0 to 10 V 4 to 20 mA 0 to 2 kHz CANbus. Protection Class: IP68 with RF-Mini or TRF-Mini-Pickoff. Weight: ... NATEC-Turbine Flow Meter with Pulse-Signa, RF-Signal or Magnetic Inductive-Signal. Output-Signals:

Turbine flow meter output and connection. (1) Digital signal output The output of the turbine flowmeter is a pulse digital signal proportional to the flow rate. The advantages are easy to accumulate and easy to send into theputer system. ①-General working voltage: +12VDC or +24VDC two kinds (the power supply must be selected before ordering).

Apr 01, 2016 · These improvements enable turbine meters to satisfy application requirements in ways once considered infeasible. Dual-Rotor Design: Turbine flow meters have traditionally offered a repeatable flow range of approximately 100:1 and a maximum linear flow range of 30:1. This performance is adequate for general-purpose applications, but may not be ...

Flowmeter SUP-LWGY Turbine flow sensor thread connection SUP-LWGY series liquid turbine flow sensor is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintece. It is used to measure the volume flow of low viscosity liquid in closed pipe. Features

Turbine flow meter output and connection Leave a Comment / Flow meter / By admin_zero (1) Digital signal output The output of the turbine flowmeter is a pulse digital signal proportional to the flow rate. The advantages are easy to accumulate and easy to send into theputer system. Pulse output type:

ple of Turbine Flow Meter. The blades on the rotor are tilted at a certain angle like a propeller, to convert the energy from the fluid flow into rotational energy. The rotor shaft rotates on a bushing/bearing where as the fluid moves faster, the rotor rotates proportionally faster. This type of flow meter is widely used for the ...

Oct 20, 2019 · SI-3202 liquid turbine flow meter is a new generation turbine flow meter. It could be used widely in measurement of closed pipe system for pure liquid, that will not react with 1Cr18Ni9Ti, 2Cr13, Al2O3 and hard alloys. • High accuracy; Normal type can reach ±1%R, ±0.5%R.High accuracy type can reach to ±0.25%R.

The turbine flow meter consists of the following majorponents: the turbine housing, shaft, rotor, pickup sensor, and transmitter. The turbine housing is nothing but a flow tube (pipe) in which a rotor is mounted on a shaft placed along the direction of expected fluid flow. The rotor is a multi-bladed, free spinning impeller which rotates ...

China Thread Connection Turbine Flow Meter, Find details about China Water Injection, Turbine Meter from Thread Connection Turbine Flow Mete.

Jan 20, 2022 · The Turbine flow meter (axial flow turbine) was invented by Reinhard Woltman in 1790 and is an accurate and reliable flow meter for many liquids and gases. It consists of a flow tube with end connections and a magnetic multi bladed free spinning rotor/impeller mounted inside, in line with the flow. The rotor is supported by a shaft that rests ...

Turbine flow meters have specially manufactured blades which differ according to the application. The faster the flow, the fease in blade rotation the surface area of the pipe is known, we can deduct the volumetric flow. Below is a video demonstrating the turbine ...

The fluid velo flowing through the turbine is directly proportional to the angular (rotational) velo of the turbine rotor.Turbine Flow meters,Nuflo Liquid Flanged,Flow Rate US GPM ,Barton 7,Flow Rate :0.45 ...

Turbine Flow Meter Manual 09/15 - / 13518 Page 7 SECTION 2.0: UNPACKING Turbine flow meters are generally shipped in one package unless optional hardware or equipment is ordered. This package may contain up to twoplete meters along with the optional installation kits. Any display equipment ordered with the meters, will be packed ...

SUP-LWGY Turbine flowmeter thread connection SUP-LWGY series liquid turbine flowmeter is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintece. It is used to measure the volume flow of low viscosity liquid in closed pipe.

Measure gases and liquids with excellent thread connection turbine meter from . These sensitive thread connection turbine meter giedibly economical prices.

a turbine flow meter's performance is highly dependent on the quality of its calibration, it is wise to utilize primary standard liquid and gas calibrations performed by NVLAP-accredited calibration facilities. The calibration criteria at these sites are based on the ISO/IEC 17025 International Standard, which is used to ...

555/100 B-Avenue, Sukhapiban 5 Rd. Au-Ngen, Saimai Bangkok Thailand. Tel., Fax., Email:. Line:@flowmetersthai

The liquid turbine flow meter in the series LWGY are specially designed for usage in water, diesel, gasoline and other fluid measurement and control systems. They operaple, i.e. the speed of an impeller turning in the fluid flow is measured and converted into pulse or 4-20mA signals. Technical Data.

A turbine flow meter is used for volumetric total flow &/or flow rate measurement & has ple. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is ...

The fundamental design goal of a turbine flow meter is to make the turbine element as free-spinning as possible, so no torque will be required to sustain the turbine’s rotation. If this goal is achieved, the turbine blades will achieve a rotating (tip) velo directly proportional to the linear velo of the fluid, whether that fluid is a ...

It also have good performance on anti-seismic and surging flow. High accuracy,0.5% normally,0.2% in option. High repeatability,its repeatability could reach 0.05%-0.2% in short-term. So this flow meter is a good choice in trade settlement. This type flow meter use micro-power technology,power consumption is low.

Jul 12, 2008 · Dear experts, We are using Barton (Model 7304) 4" turbine flow meters (6"flow line, Pressure 700PSI) to measure water injection. We are facing a problem in measurements at lower range, so our engineering consultant suggested we use 2" Turbine flow meters to get accurate flow measurement at...

Sep 07, 2020 · Themon pulse flow meter is the turbine flowmeter. The turbine flowmeter outputs pulse signals and is suitable for use withputer control systems such as secondary displays, PLCs, and DCS. All turbine flow meters provided by Sino-Inst can output pulse frequency signals. It is used to detect the instantaneous flow rate and the total ...

Features & Specification. In-line digital flow meter sensor. Thread connection from DN4 to 2”, or other sizes available. Standard thread G standard, or other thread is available, such NPT thread. High accuracy: 0.5% or 1.0% of Reading. Large turn down ratio: 10:1.

NUFLO turbine flow meters indicate flow rate and measure total throughput of a liquid line. As liquid flows through the meter and over the rotor, the rotor turns at a speed that is directly proportional to the flow rate. A magnetic pickup senses the rotor blades as they pass and generates an electrical (sine wave) signal.

Aug 29, 2018 · The flow meter’s repeatability is ±0.1 percent. It has a standard operating temperature range of -150 F to 350 F (-101 C to 177 C) with a 10:1 turndown ratio. The turbine flow meter can be coupled with an electronic flow monitor to provide multiple local read and system integration options.

Turbine Flow Meter Model Number Selection and Sizing Guidelines There are 4 major steps in defining a turbine flow meter; these are: • Choosing the flow meter size • Bearing selection • Pick-off selection • Calibration requirements Theseponents are interrelated and should be consid - ered as a system to obtain optimum meter performance.

the flow meter’s end connection. • Throttling/control valves should be located downstream of the flow meter. magnetic pickup/electronics installation • The meter’s permanent conduit connection has 1” MNPT threads for attaching an electronic readout instrument. • The conduit connection is designed for use with a 5/8” to

impeller flow meter for very low flow volumes: SM-04: impeller flow meter from plastic, brass or stainless steel up to 100 l/min: SD-04: impeller flow meter with batching or switching electronics: SD-05: impeller flow meter from plastic up to 1000 l/min: SM-08: turbine flowmeter from plastic, brass or stainless steel: SM-11N